Regulation (EU) 2024/3110 of the European Parliament and of the Council of 27 Nov... (32024R3110)
INHALT
Regulation (EU) 2024/3110 of the European Parliament and of the Council of 27 November 2024 laying down harmonised rules for the marketing of construction products and repealing Regulation (EU) No 305/2011 (Text with EEA relevance)
- REGULATION (EU) 2024/3110 OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL
- of 27 November 2024
- laying down harmonised rules for the marketing of construction products and repealing Regulation (EU) No 305/2011
- (Text with EEA relevance)
- CHAPTER I
- GENERAL PROVISIONS
- Article 1
- Subject matter and objectives
- Article 2
- Scope
- Article 3
- Definitions
- Article 4
- Working plan and preparatory phase for the development of harmonised technical specifications
- Article 5
- Harmonised standards laying down essential characteristics dealing with performance
- Article 6
- Other harmonised technical specifications laying down essential characteristics
- Article 7
- Product requirements and harmonised standards conferring a presumption of conformity
- Article 8
- Common specifications conferring a presumption of conformity
- Article 9
- General product information, instructions for use and safety information
- Article 10
- Assessment and verification systems
- Article 11
- Harmonised zone and national measures
- Article 12
- Relationship with other Union law
- CHAPTER II
- PROCEDURE, DECLARATIONS AND MARKINGS
- Article 13
- Declaration of performance and conformity
- Article 14
- Exemptions from drawing up a declaration of performance and conformity
- Article 15
- Content of the declaration of performance and conformity
- Article 16
- Supply of the declaration of performance and conformity
- Article 17
- General principles and use of CE marking
- Article 18
- Rules and conditions for the affixing of CE marking
- Article 19
- Other markings and performance claims
- CHAPTER III
- OBLIGATIONS AND RIGHTS OF ECONOMIC OPERATORS
- Article 20
- Obligations of all economic operators
- Article 21
- Rights of manufacturers
- Article 22
- Obligations of manufacturers
- Article 23
- Obligations of authorised representatives
- Article 24
- Obligations of importers
- Article 25
- Obligations of distributors
- Article 26
- Cases in which obligations of manufacturers apply to importers and distributors
- Article 27
- Obligations of fulfilment service providers
- Article 28
- Obligations of online marketplaces
- Article 29
- Online and other distance sales
- Article 30
- Implementing acts regarding the obligations and rights of economic operators
- CHAPTER IV
- EUROPEAN ASSESSMENT DOCUMENTS
- Article 31
- European assessment documents
- Article 32
- Principles and procedure for the development and adoption of European assessment documents
- Article 33
- Obligations of the TAB receiving a request for a European technical assessment
- Article 34
- Publication of references
- Article 35
- Content of the European assessment document
- Article 36
- Formal objections against European assessment documents
- Article 37
- European technical assessment
- CHAPTER V
- TECHNICAL ASSESSMENT BODIES
- Article 38
- Designating authorities
- Article 39
- Designation, monitoring and evaluation of TABs
- Article 40
- Requirements for TABs
- Article 41
- Coordination of TABs
- CHAPTER VI
- NOTIFYING AUTHORITIES AND NOTIFIED BODIES
- Article 42
- Notification
- Article 43
- Notifying authorities
- Article 44
- Requirements relating to notifying authorities
- Article 45
- Coordination of notifying and designating authorities
- Article 46
- Requirements relating to notified bodies
- Article 47
- Presumption of conformity of notified bodies
- Article 48
- Subsidiaries and subcontractors of notified bodies
- Article 49
- Use of facilities outside the testing laboratory of the notified body
- Article 50
- Application for notification
- Article 51
- Notification procedure
- Article 52
- Identification numbers and lists of notified bodies
- Article 53
- Changes to the notification
- Article 54
- Challenge of the competence of notified bodies
- Article 55
- Operational obligations of notified bodies
- Article 56
- Information obligations of notified bodies
- Article 57
- Implementing acts on notified bodies’ obligations
- Article 58
- Coordination of notified bodies
- CHAPTER VII
- SIMPLIFIED PROCEDURES
- Article 59
- Replacement of type-testing and type-calculation
- Article 60
- Use of simplified procedures by micro-enterprises
- Article 61
- Custom-made non-series products
- Article 62
- Recognition of assessment and verification by another notified body
- CHAPTER VIII
- MARKET SURVEILLANCE AND SAFEGUARD PROCEDURES
- Article 63
- Complaint portal
- Article 64
- Market surveillance authorities and single liaison point
- Article 65
- Procedure to deal with non-compliance
- Article 66
- Union safeguard procedure
- Article 67
- Compliant products which nevertheless present a risk
- Article 68
- Market surveillance coordination and support
- Article 69
- Recovery of costs
- Article 70
- Reporting and benchmarking
- CHAPTER IX
- INFORMATION AND ADMINISTRATIVE COOPERATION
- Article 71
- Information systems for harmonised decision-making
- Article 72
- Product contact points for construction
- Article 73
- Training and exchange of staff
- Article 74
- Shared roles and joint decision-making
- CHAPTER X
- DIGITAL PRODUCT PASSPORT
- Article 75
- Construction digital product passport system
- Article 76
- Digital product passport
- Article 77
- General requirements for the digital product passport
- Article 78
- Technical design and operation of the digital product passport
- Article 79
- Unique identifiers and digital product passport registry
- Article 80
- Mandatory use and technical adaptation
- CHAPTER XI
- INTERNATIONAL COOPERATION
- Article 81
- International cooperation
- CHAPTER XII
- INCENTIVES AND PUBLIC PROCUREMENT
- Article 82
- Member State incentives for construction products
- Article 83
- Green public procurement
- CHAPTER XIII
- REGULATORY STATUS OF PRODUCTS
- Article 84
- Regulatory status of products
- CHAPTER XIV
- EMERGENCY PROCEDURES
- Article 85
- Application of emergency procedures
- Article 86
- Prioritisation of the assessment and verification of crisis-relevant construction products
- Article 87
- Assessment and declaration of performance based on standards and common specifications
- Article 88
- Prioritisation of market surveillance activities and mutual assistance among authorities
- CHAPTER XV
- FINAL PROVISIONS
- Article 89
- Delegated acts
- Article 90
- Committee procedure
- Article 91
- Electronic applications, decisions, documentation and information
- Article 92
- Penalties
- Article 93
- Evaluation
- Article 94
- Repeal
- Article 95
- Derogations and transitional provisions
- Article 96
- Entry into force
- ANNEX I
- Basic requirements for construction works
- 1. Structural integrity of construction works
- 2. Fire safety of construction works
- 3. Protection against adverse hygiene and health impacts related to construction works
- 4. Safety and accessibility of construction works
- 5. Resistance to the passage of sound and acoustic properties of construction works
- 6. Energy efficiency and thermal performance of construction works
- 7. Emissions into the outdoor environment of construction works
- 8. Sustainable use of natural resources of construction works
- ANNEX II
- Predetermined environmental essential characteristics
- ANNEX III
- Product requirements
- 1. Product requirements ensuring appropriate functioning and performance
- 2. Product safety requirements
- 3. Product environmental requirements
- ANNEX IV
- General product information, instructions for use and safety information
- 1. General product information
- 2. Instructions for use and safety information
- ANNEX V
- Declaration of performance and conformity referred to in Article 15 (1)
- ANNEX VI
- Procedure for requesting European technical assessments and for adopting a European assessment document
- 1. Request for a European technical assessment
- 2. Contract
- 3. Communication of work programme
- 4. The draft European assessment document
- 5. Commission Participation
- 6. Member States consultation
- 7. Extension and delay
- 8. Amendments and adoption of a draft European assessment document
- 9. Commission assessment of draft European assessment documents
- 10. Adoption of final European assessment document and publication
- ANNEX VII
- List of product families
- ANNEX VIII
- Requirements for TABs
- ANNEX IX
- Assessment and verification systems (AVS)
- 1. System 1+
- Full notified body control including audit sample testing
- 2. System 1
- Full notified body control without audit sample testing
- 3. System 2+
- Notified body focusing on the factory production control
- 4. System 3+
- Notified body’s control of environmental sustainability assessment
- 5. System 3
- Notified body focusing on the determination of the product type
- 6. System 4
- Manufacturer’s self-verification and self-certification
- ANNEX X
- Essential characteristics of a horizontal nature
- ANNEX XI
- Correlation tables
Feedback