Regulation No 102 of the Economic Commission for Europe of the United Nations... (42008X1230(02))
Regulation No 102 of the Economic Commission for Europe of the United Nations (UN/ECE) — Uniform provisions concerning the approval of I. A close-coupling device (CCD) II. Vehicles with regard to the fitting of an approved type of CCD
- Regulation No 102 of the Economic Commission for Europe of the United Nations (UN/ECE) — Uniform provisions concerning the approval of
- 1. SCOPE
- 2. DEFINITIONS
- SECTION I
- APPROVAL OF A CLOSE-COUPLING DEVICE (CCD)
- 3. APPLICATION FOR APPROVAL
- 4. APPROVAL
- 5. SPECIFICATIONS
- 5.1. General
- 5.1.5. System failures
- 5.2. Tests
- 6. MODIFICATION OF CCD TYPE AND EXTENSION OF APPROVAL
- 7. CONFORMITY OF PRODUCTION
- 8. PENALTIES FOR NON-CONFORMITY OF PRODUCTION
- 9. PRODUCTION DEFINITELY DISCONTINUED
- 10. NAMES AND ADDRESSES OF TECHNICAL SERVICES RESPONSIBLE FOR CONDUCTING APPROVAL TESTS AND OF ADMINISTRATIVE DEPARTMENTS
- SECTION II
- APPROVAL OF VEHICLES WITH REGARD TO THE FITTING OF AN APPROVED TYPE OF CCD
- 11. APPLICATION FOR APPROVAL
- 12. APPROVAL
- 13. REQUIREMENTS CONCERNING THE FITTING OF AN APPROVED CCD
- 14. MODIFICATIONS OF THE VEHICLE TYPE AND EXTENSION OF APPROVAL
- 15. CONFORMITY OF PRODUCTION
- 16. PENALTIES FOR NON-CONFORMITY OF PRODUCTION
- 17. PRODUCTION DEFINITELY DISCONTINUED
- 18. NAMES AND ADDRESSES OF TECHNICAL SERVICES RESPONSIBLE FOR CONDUCTING APPROVAL TESTS AND OF ADMINISTRATIVE DEPARTMENTS
- ANNEX I
- COMMUNICATION
- (Maximum format: A4 (210 × 297 mm))
- ANNEX II
- COMMUNICATION
- (Maximum format: A4 (210 × 297 mm))
- ANNEX III
- EXAMPLE OF THE APPROVAL MARK
- ANNEX IV
- REQUIREMENTS CONCERNING TESTS AND PERFORMANCE(1)
- (See paragraph 5.1.10)
- 1. CCD RECOVERY DISTANCE
- Figure 1
- 2. STABILITY OF THE COMBINATION
- 2.1. TEST CONDITIONS
- 2.1.1. Loading conditions
- 2.2. STRAIGHT LINE STABILITY TEST
- 2.3. CHANGE OF LANE
- 3. CIRCULAR MOVEMENT
- Figure 2
- Figure 3
- Figure 4
- 4. SLOPES
- Appendix
- OVERTAKING TRACK
- (See paragraph 2.3.1)
Feedback