2011/217/EU: Commission Recommendation of 29 March 2011 on the authorisation for ... (32011H0217) 
                
                
            INHALT
2011/217/EU: Commission Recommendation of 29 March 2011 on the authorisation for the placing in service of structural subsystems and vehicles under Directive 2008/57/EC of the European Parliament and of the Council Text with EEA relevance
- COMMISSION RECOMMENDATION
 - of 29 March 2011
 - on the authorisation for the placing in service of structural subsystems and vehicles under Directive 2008/57/EC of the European Parliament and of the Council
 - (Text with EEA relevance)
 - (2011/217/EU)
 - ANNEX
 - 1.
 - Introduction
 - 2.
 - Interoperability constituents, subsystems and vehicles
 - 2.1.
 - Interoperability constituents and subsystems
 - 2.2.
 - Vehicles
 - 3.
 - Requirements to be met when manufacturing a subsystem
 - 3.1.
 - Types of requirements
 - 3.1.1.
 - Essential requirements
 - 3.1.2.
 - Essential requirements of Directive 2008/57/EC
 - 3.1.3.
 - Technical specifications for interoperability (TSI)
 - 3.1.4.
 - National rules
 - 3.1.5.
 - Harmonised standards (ENs)
 - 3.2.
 - Evolution of interoperability
 - 4.
 - Verifications that ICs and subsystems have been built in accordance with the applicable requirements
 - 4.1.
 - Assessment of the conformity or suitability for use of interoperability constituents (ICs)
 - 4.2.
 - Verification procedure for subsystems
 - (8)
 - 4.2.1.
 - ‘EC’ verification procedure for subsystems
 - 4.2.2.
 - Verification procedure of subsystems in the case of national rules
 - 4.2.3.
 - Declaration drawn up by the applicant
 - (10)
 - 5.
 - Authorisation for placing in service
 - 5.1.
 - What is authorisation for placing in service?
 - 5.1.1.
 - Concept
 - 5.1.2.
 - Authorisation for the placing in service of subsystems
 - 5.1.3.
 - Authorisation for placing in service of vehicles
 - 5.2.
 - The border between the authorisation for placing in service and the operation and maintenance of subsystems and vehicles
 - 5.2.1.
 - General principles
 - 5.2.2.
 - Operational and maintenance requirements to be verified before the authorisation for placing in service
 - 5.2.3.
 - Safety Management Systems (SMSs)
 - 5.3.
 - Technical compatibility, safe integration and compatibility between vehicles
 - 5.3.1.
 - Technical compatibility
 - 5.3.2.
 - Safe integration
 - 5.3.3.
 - Compatibility between vehicles
 - 5.4.
 - Authorisations in the case of TSI conform and non-TSI conform vehicles
 - 5.4.1.
 - Authorisation of TSI conform vehicles
 - 5.4.2.
 - Authorisation of non-TSI conform vehicles
 - 5.5.
 - Vehicle type authorisation
 - 5.6.
 - Authorisations for vehicles running on TEN and off TEN
 - 5.7.
 - Authorisations for vehicles coming from third countries
 - 6.
 - Process to be followed after authorisation
 - 6.1.
 - Forming a train
 - 6.2.
 - Ascertaining route compatibility
 - 6.3.
 - Obtaining the path (allocating capacity)
 - 7.
 - Modifications in a subsystem or vehicle that is already authorised
 - 7.1.
 - Procedure to be followed
 - 7.2.
 - Link between specific cases, derogations and partial application of TSIs in the case of renewal/upgrading
 - 8.
 - Roles and responsibilities
 - 8.1.
 - Applicant for the authorisation for placing in service
 - 8.2.
 - Railway Undertaking (RU)
 - 8.3.
 - Infrastructure Manager (IM)
 - 8.4.
 - Entity in Charge of Maintenance (ECM)
 - 8.5.
 - Notified Body (NoBo)
 - 8.6.
 - Designated Body (DeBo)
 - 8.7.
 - National Safety Authority (NSA)
 - 8.8.
 - Member State (MS)
 - 8.9.
 - Assessment body in the context of the CSM on RA (CSM assessment body)
 - 9.
 - Registers
 - 9.1.
 - Network statement
 - 9.2.
 - Register of infrastructure (RINF)
 - 9.3.
 - European register of authorised type of vehicles (ERATV)
 - 9.4.
 - National vehicle register (NVR)
 - 9.5.
 - Reference Document
 - 9.6.
 - Vehicle keeper marking list (VKM)
 - 10.
 - Graphics related to the authorisation procedures of Directive 2008/57/EC
 - Figure 1
 - Art. 15 APS of APS of fixed fixed subsystems
 - Figure 2
 - Art. 22 (2)(a) 1st APS TSI-conform conform vehicles
 - Figure 3
 - Art. 22(2)(b) 1st APS TSI-conform conform vehicles
 - Figure 4
 - Art 23 (1) Additional APS TSI-conform «going everywhere» vehicles
 - Figure 5
 - Art 23 Additional APS TSI-conform vehicles
 - Figure 6
 - Art 24 1st APS non-TSI conform vehicles
 - Figure 7
 - Art 25 Additional APS non-TSI conform vehicles