16 CFR Part 1203
PART 1203—SAFETY STANDARD FOR BICYCLE HELMETS
- PART 1203—SAFETY STANDARD FOR BICYCLE HELMETS
- Chapter II—Consumer Product Safety Commission › Subchapter B—Consumer Product Safety Act Regulations
- Subpart A—The Standard
- § 1203.1 Scope, general requirements, and effective date.
- § 1203.2 Purpose and basis.
- § 1203.3 Referenced documents.
- § 1203.4 Definitions.
- § 1203.5 Construction requirements—projections.
- § 1203.6 Labeling and instructions.
- § 1203.7 Samples for testing.
- § 1203.8 Conditioning environments.
- § 1203.9 Test headforms.
- § 1203.10 Selecting the test headform.
- § 1203.11 Marking the impact test line.
- § 1203.12 Test requirements.
- § 1203.13 Test schedule.
- § 1203.14 Peripheral vision test.
- § 1203.15 Positional stability test (roll-off resistance).
- § 1203.16 Dynamic strength of retention system test.
- § 1203.17 Impact attenuation test.
- Subpart B—Certification
- § 1203.30 Purpose, basis, and scope.
- § 1203.31 Applicability date.
- § 1203.32 Definitions.
- § 1203.33 Certification testing.
- § 1203.34 Product certification and labeling by manufacturers (including importers).
- Subpart C—Recordkeeping
- § 1203.40 Effective date.
- § 1203.41 Recordkeeping requirements.
- Subpart D—Requirements For Bicycle Helmets Manufactured From March 17, 1995, Through March 10, 1999
- § 1203.51 Purpose and basis.
- § 1203.52 Scope and effective date.
- § 1203.53 Interim safety standards.
- Figure 1 to Part 1203—Anatomical Planes
- Figure 2 to Part 1203—ISO Headform-Basic, Reference, and Median Planes
- Figure 3 to Part 1203—Location of Reference Plane
- Figure 4 to Part 1203—Location of Test Lines for Helmets Intended for Persons Five (5) Years of Age and Older
- Figure 5 to Part 1203—Location of Test Lines for Helmets Intended for Persons Ages 1 and Older
- Figure 6 to Part 1203—Field of Vision
- Figure 7 to Part 1203—Typical Test Apparatus for Positional Stability Test
- Figure 8 to Part 1203—Apparatus for Test of Retention System Strength
- Figure 9 to Part 1203—Impact Test Apparatus
- Figure 10 to Part 1203—Center of Gravity for Drop Assembly
- Figures 11, 12 and 13 to Part 1203—Hemispherical Anvil and Curbstone Anvil
Feedback