Regulation No 3 of the Economic Commission for Europe of the United Nations (... (42011X1206(01))
Regulation No 3 of the Economic Commission for Europe of the United Nations (UN/ECE) — Uniform provisions concerning the approval of retro-reflecting devices for power-driven vehicles and their trailers
- Regulation No 3 of the Economic Commission for Europe of the United Nations (UN/ECE) — Uniform provisions concerning the approval of retro-reflecting devices for power-driven vehicles and their trailers
- 1. SCOPE
- 2. DEFINITIONS(3)
- 3. APPLICATION FOR APPROVAL
- 4. MARKINGS
- 5. APPROVAL
- 6. GENERAL SPECIFICATIONS
- 7. SPECIAL SPECIFICATIONS (TESTS)
- 8. CONFORMITY OF PRODUCTION
- 9. PENALTIES FOR NON-CONFORMITY OF PRODUCTION
- 10. PRODUCTION DEFINITELY DISCONTINUED
- 11. NAMES AND ADDRESSES OF TECHNICAL SERVICES RESPONSIBLE FOR CONDUCTING APPROVAL TESTS, AND OF ADMINISTRATIVE DEPARTMENTS
- 12. TRANSITIONAL PROVISIONS
- ANNEX 1
- RETRO-REFLECTING DEVICES
- Symbols and units
- RETRO-REFLECTORS
- Symbols
- ANNEX 2
- COMMUNICATION
- (Maximum format: A4 (210 × 297 mm))
- ANNEX 3
- EXAMPLES OF APPROVAL MARKS
- Figure 1
- (Marking for single lamps)
- MODEL A
- MODEL B
- MODEL C
- Figure 2
- (Simplified marking for grouped, combined or reciprocally incorporated lamps)
- MODEL D
- MODEL E
- MODEL F
- ANNEX 4
- TEST PROCEDURE — CLASS IA AND CLASS IIIA
- ANNEX 5
- SPECIFICATIONS OF SHAPE AND DIMENSIONS
- 1. SHAPE AND DIMENSIONS OF RETRO-REFLECTING DEVICES IN CLASS IA OR IB
- 2. SHAPE AND DIMENSIONS OF RETRO-REFLECTING DEVICES IN CLASSES IIIA AND IIIB (see Appendix to this Annex)
- 3. SHAPE AND DIMENSIONS OF RETRO-REFLECTING DEVICES IN CLASS IVA
- ANNEX 6
- COLORIMETRIC SPECIFICATIONS
- ANNEX 7
- PHOTOMETRIC SPECIFICATIONS
- 3. CIL values
- 3.1. Class IA, Class IB, Class IIIA and Class IIIB
- ANNEX 8
- RESISTANCE TO EXTERNAL AGENTS
- 1. RESISTANCE TO WATER AND DIRT PENETRATION
- 1.1. Water submersion test
- 1.2. Alternative test procedure for Classes IB and IIIB devices
- 1.2.1. Moisture test
- 1.2.1.1. Water spray test equipment
- 1.2.1.1.1. Cabinet
- 1.2.1.1.2. Rotating test platform
- 1.2.1.1.3. Precipitation rate
- 1.2.1.2. Water spray test procedure
- 1.2.1.2.1. Device openings
- 1.2.1.2.2. Rotational speed
- 1.2.1.2.4. Test duration
- 1.2.1.2.5. Drain period
- 1.2.1.2.6. Sample evaluation
- 1.2.2. Dust exposure test
- 1.2.2.1. Dust exposure test equipment
- 1.2.2.1.1. Dust exposure test chamber
- 1.2.2.1.2. The dust
- 1.2.2.2. Dust exposure test procedure
- 1.2.2.2.1. Device openings
- 1.2.2.2.2. Dust exposure
- 1.2.2.2.3. Measured sample evaluation
- 2. RESISTANCE TO CORROSION
- 3. RESISTANCE TO FUELS
- 4. RESISTANCE TO LUBRICATING OILS
- 5. RESISTANCE OF THE ACCESSIBLE REAR FACE OF MIRROR-BACKED RETRO-REFLECTING DEVICES
- ANNEX 9
- STABILITY IN TIME OF THE OPTICAL PROPERTIES
- (1)
- OF RETRO-REFLECTING DEVICES
- ANNEX 10
- RESISTANCE TO HEAT
- ANNEX 11
- COLOUR-FASTNESS
- (1)
- ANNEX 12
- ANNEX 13
- RESISTANCE TO IMPACT — CLASS IVA
- ANNEX 14
- TEST PROCEDURE — CLASS IVA
- ANNEX 15
- ANNEX 16
- TEST PROCEDURE FOR CLASSES IB AND IIIB DEVICES
- ANNEX 17
- MINIMUM REQUIREMENTS FOR CONFORMITY OF PRODUCTION CONTROL PROCEDURES
- 1. GENERAL
- 2. MINIMUM REQUIREMENTS FOR VERIFICATION OF CONFORMITY BY THE MANUFACTURER
- 2.1. Nature of tests
- 2.2. Methods used in tests
- 2.3. Nature of sampling
- 2.4. Measured and recorded photometric characteristics
- 2.5. Criteria governing acceptability
- ANNEX 18
- MINIMUM REQUIREMENTS FOR SAMPLING BY AN INSPECTOR
- 1. GENERAL
- 2. FIRST SAMPLING
- 2.1. The conformity is not contested
- 2.2. The conformity is contested
- 2.3. Approval withdrawn
- 3. REPEATED SAMPLING
- 3.1. The conformity is not contested
- 3.2. The conformity is contested
- 3.3. Approval withdrawn
- 4. RESISTANCE TO PENETRATION OF WATER
- Figure
Feedback