2025/627

31.3.2025

COMMISSION IMPLEMENTING REGULATION (EU) 2025/627

of 28 March 2025

establishing, pursuant to Regulation (EU) 2024/573 of the European Parliament and of the Council, minimum requirements for certificates of natural persons and the conditions for the mutual recognition of such certificates, as regards the installation, maintenance or servicing, repair or decommissioning of stationary electrical switchgear containing fluorinated greenhouse gases and recovery of fluorinated greenhouse gases from stationary electrical switchgear and repealing Commission Implementing Regulation (EU) 2015/2066

(Text with EEA relevance)

THE EUROPEAN COMMISSION,

Having regard to the Treaty on the Functioning of the European Union,

Having regard to Regulation (EU) 2024/573 of the European Parliament and of the Council of 7 February 2024 on fluorinated greenhouse gases, amending Directive (EU) 2019/1937 and repealing Regulation (EU) No 517/2014 (1), and in particular Article 10(8) thereof,

Whereas:

(1) Regulation (EU) 2024/573 includes obligations concerning the certification of natural and legal persons to carry out certain activities involving fluorinated greenhouse gases or relevant alternatives to fluorinated greenhouse gases.

(2) Regulation (EU) 2024/573 introduced new rules regarding the installation, maintenance or servicing, repair or decommissioning of stationary electrical switchgear containing fluorinated greenhouse gases and recovery of fluorinated greenhouse gases from stationary electrical switchgear. The new rules cover in particular, an extended scope of substances.

(3) It is therefore necessary, pursuant to Article 10 of Regulation (EU) 2024/573, to update the minimum requirements for the certification of natural persons as to the scope of substances and skills and knowledge to be covered and to specify the rules for the certification and the conditions for mutual recognition of certificates.

(4) Regulation (EU) 2024/573 replaced Regulation (EU) No 517/2014 of the European Parliament and of the Council (2). Commission Implementing Regulation (EU) 2015/2066 (3) should therefore be repealed.

(5) The measures provided for in this Regulation are in accordance with the opinion of the Committee on fluorinated greenhouse gases, established by Article 34(1) of Regulation (EU) 2024/573,

HAS ADOPTED THIS REGULATION:

Article 1

Scope

1.   This Regulation shall apply to natural persons carrying out the following activities:

(a) installation, maintenance, servicing, repair and decommissioning of stationary electrical switchgear containing fluorinated greenhouse gases listed in Annex I, in Section 1 of Annex II and in Annex III to Regulation (EU) 2024/573;

(b) recovery of fluorinated greenhouse gases from stationary electrical switchgear.

2.   This Regulation shall not apply to any manufacturing activity undertaken at manufacturer’s sites for stationary electrical switchgear.

Article 2

Certificates for natural persons

1.   Natural persons carrying out the activities referred to in Article 1(1) shall hold a certificate as referred to in Article 3.

2.   Natural persons undertaking one of the activities referred to in Article 1(1) shall not be subject to the requirement laid down in paragraph 1 of this Article provided that they meet the following conditions:

(a) they are enrolled in a training course for the purpose of obtaining a certificate covering the relevant activity; and

(b) they carry out the activity under the supervision of a person holding a certificate covering that activity and who is fully responsible for the correct execution of the activity.

The derogation provided for in the first subparagraph shall apply for the duration of periods spent carrying out the activities referred to in Article 1(1) not exceeding 24 months in total.

Article 3

Certification of natural persons

1.   A certification body as referred to in Article 4 shall issue a certificate to natural persons who have passed a theoretical and practical examination organised by an evaluation body as referred to in Article 5, covering the minimum skills and knowledge set out in Annex I.

2.   The certificate shall contain at least the following:

(a) the name of the certification body, the full name of its holder, a certificate number, and the date of expiry if any;

(b) the activities which the holder of the certificate is entitled to perform;

(c) the issuing date and issuer’s signature.

3.   Member States may allow certification bodies to exempt applicants from the requirement of passing the examination referred to in paragraph 1, where the applicant previously acquired skills and knowledge equivalent to those listed in Annex I.

Member States may allow certification bodies to require applicants only to pass a supplementary examination, where the applicant’s previously acquired skills and knowledge are partly covered under those listed in Annex I.

Article 4

Certification body

1.   Member States shall specify in national law or designate the authority or authorities competent to designate, a certification body authorised to issue certificates to natural persons involved in one or more of the activities referred to in Article 1(1).

The certification body shall be impartial in carrying out its activities.

2.   The certification body shall establish and apply procedures for the issuance, suspending and withdrawing of certificates.

3.   The certification body shall maintain records that allow verifying the status of a certified natural person. The records shall demonstrate that the certification process has been effectively fulfilled. Records shall be kept for a minimum period of 5 years.

Article 5

Evaluation body

1.   An evaluation body designated in each Member State shall organise examinations for the natural persons referred to in Article 1. A certification body as referred to in Article 4 may also qualify as an evaluation body. The evaluation body shall be independent and impartial in carrying out its activities.

2.   Examinations shall be planned and structured in a manner which ensures that the minimum skills and knowledge set out in Annex I are covered. The evaluation body shall provide the place of examinations that ensure safety of the applicants.

3.   The evaluation body shall adopt reporting procedures and keep records to enable the documentation of the individual and overall results of the evaluation.

4.   The evaluation body shall ensure that examiners assigned to an examination have due knowledge of the relevant examination methods and examination documents as well as appropriate competence in the field to be examined. It shall also ensure that the necessary equipment, tools and materials are available for the practical examinations.

Article 6

Conditions for mutual recognition

1.   Mutual recognition of certificates between Member States shall only apply to certificates issued in accordance with Article 3, for the activities specified in these certificates.

2.   Member States shall not impose any evaluation or other type of assessment procedures or disproportionate administrative requirements on holders of certificates issued by another Member State for the purpose of the recognition of those certificates or for allowing access to employment to the holders of those certificates for the activities specified therein.

3.   Member States may require holders of certificates issued in another Member State to provide a translation of the certificate into another official language of the Union.

Article 7

Existing certificates, refresher training courses or evaluation processes

1.   Member States shall ensure that the refresher training courses or evaluation processes as required under Article 10(9) of Regulation (EU) 2024/573 provide proof of the certified natural persons’ practical and theoretical knowledge and skills specified in Annex I of this Regulation.

2.   Pursuant to Article 10(9) of Regulation (EU) 2024/573, Member States shall ensure that holders of existing certificates under Article 3 of Commission Implementing Regulation (EU) 2015/2066 are only allowed to continue using those certificates if they update their knowledge and skills to the level of the knowledge and skills required for the certificate as referred to in Article 3 of this Regulation and specified in Annex I thereto.

Article 8

Repeal

1.   Regulation (EU) 2015/2066 is repealed.

2.   References to the repealed Regulation shall be construed as references to this Regulation and read in accordance with the correlation table in Annex II.

Article 9

Entry into force

This Regulation shall enter into force on the twentieth day following that of its publication in the

Official Journal of the European Union

.

This Regulation shall be binding in its entirety and directly applicable in all Member States.

Done at Brussels, 28 March 2025.

For the Commission

The President

Ursula VON DER LEYEN

(1)  

OJ L, 2024/573, 20.2.2024, ELI: http://data.europa.eu/eli/reg/2024/573/oj

.

(2)  Regulation (EU) No 517/2014 of the European Parliament and of the Council of 16 April 2014 on fluorinated greenhouse gases and repealing Regulation (EC) No 842/2006 (

OJ L 150, 20.5.2014, p. 195

, ELI:

http://data.europa.eu/eli/reg/2014/517/oj

).

(3)  Commission Implementing Regulation (EU) 2015/2066 of 17 November 2015 establishing, pursuant to Regulation (EU) No 517/2014 of the European Parliament and of the Council, minimum requirements and the conditions for mutual recognition for the certification of natural persons carrying out installation, servicing, maintenance, repair or decommissioning of electrical switchgear containing fluorinated greenhouse gases or recovery of fluorinated greenhouse gases from stationary electrical switchgear (

OJ L 301, 18.11.2015, p. 22

, ELI:

http://data.europa.eu/eli/reg_impl/2015/2066/oj

).

ANNEX I

Minimum requirements as to the skills and knowledge to be covered by the evaluation bodies

The examination referred to in Article 5 shall comprise the following:

(a) a theoretical test with one or more questions testing that skill or knowledge, as indicated in the column ‘Test type’ by (T);

(b) a practical test where the applicant shall perform the corresponding task with the relevant material, tools and equipment, as indicated in the column ‘Test type’ by (P).

ANNEX II

Correlation table

ELI: http://data.europa.eu/eli/reg_impl/2025/627/oj

ISSN 1977-0677 (electronic edition)