PART 705—EFFECT OF IMPORTED ARTICLES ON THE NATIONAL SECURITY

Subtitle B—Regulations Relating to Commerce and Foreign Trade › Chapter VII—Bureau of Industry and Security, Department of Commerce › Subchapter A—National Security Industrial Base Regulations

§ 705.1 Definitions.

As used in this part:

Department means the United States Department of Commerce and includes the Secretary of Commerce and the Secretary's designees.

Secretary means the Secretary of Commerce or the Secretary's designees.

Applicant means the person or entity submitting a request or application for an investigation pursuant to this part.

§ 705.2 Purpose.

These regulations set forth the procedures by which the Department shall commence and conduct an investigation to determine the effect on the national security of the imports of any article. Based on this investigation, the Secretary shall make a report and recommendation to the President for action or inaction regarding an adjustment of the imports of the article.

§ 705.3 Commencing an investigation.

(a) Upon request of the head of any government department or agency, upon application of an interested party, or upon motion of the Secretary, the Department shall immediately conduct an investigation to determine the effect on the national security of the imports of any article.

(b) The Secretary shall immediately provide notice to the Secretary of Defense of any investigation initiated under this part.

§ 705.4 Criteria for determining effect of imports on the national security.

(a) To determine the effect on the national security of the imports of the article under investigation, the Department shall consider the quantity of the article in question or other circumstances related to its import. With regard for the requirements of national security, the Department shall also consider the following:

(1) Domestic production needed for projected national defense requirements;

(2) The capacity of domestic industries to meet projected national defense requirements;

(3) The existing and anticipated availabilities of human resources, products, raw materials, production equipment and facilities, and other supplies and services essential to the national defense;

(4) The growth requirements of domestic industries to meet national defense requirements and the supplies and services including the investment, exploration and development necessary to assure such growth; and

(5) Any other relevant factors.

(b) In recognition of the close relation between the strength of our national economy and the capacity of the United States to meet national security requirements, the Department shall also, with regard for the quantity, availability, character and uses of the imported article under investigation, consider the following:

(1) The impact of foreign competition on the economic welfare of any domestic industry essential to our national security;

(2) The displacement of any domestic products causing substantial unemployment, decrease in the revenues of government, loss of investment or specialized skills and productive capacity, or other serious effects; and

(3) Any other relevant factors that are causing or will cause a weakening of our national economy.

§ 705.5 Request or application for an investigation.

(a) A request or application for an investigation shall be in writing. The original, 1 copy and an electronic version of the report in the form of a Portable Document Format (PDF) file shall be filed with the Director, Office of Technology Evaluation, Room H-1093, U.S. Department of Commerce, Washington, DC 20230, with the PDF version being submitted to DIBPrograms@bis.doc.gov. An application for an investigation from an interested party that includes information submitted in confidence in accordance with the procedures of § 705.6 must also include a public version in written and electronic form containing all non-confidential information and public summaries of business confidential information as provided below. For persons seeking to submit business confidential information (trade secrets, commercial or financial information, or any other information considered sensitive or privileged), the public version of the application must contain a summary of the business confidential information in sufficient detail to permit a reasonable understanding of the substance of the information. Generally, numerical data will be considered adequately summarized if grouped or presented in terms of indices or figures within 10 percent of the actual figure. If an individual portion of the numerical data is voluminous (e.g., 5 pages of numerical data), at least one percent of the numerical data, representative of that portion, must be summarized. If the submitter claims that summarization is not possible, the claim must be accompanied by a full explanation of the reason(s). In order to submit business confidential information that is not for public release or classified national security information as a separate submission to the U.S. Department of Commerce, applicants must follow the procedures specified in § 705.6.

Note 1 to paragraph (a): Requests for an investigation from United States Government agencies need not include a public version.

(b) When a request, application or motion is under investigation, or when an investigation has been completed pursuant to § 705.10 of this part, any subsequently filed request or application concerning imports of the same or related article that does not raise new or different issues may be either consolidated with the investigation in progress as provided in § 705.7(e) of this part, or rejected. In either event, an explanation for taking such action shall be promptly given to the applicant. If the request or application is rejected, it will not be returned unless requested by the applicant.

(c) Requests or applications shall describe how the quantity, availability, character, and uses of a particular imported article, or other circumstances related to its import, affect the national security, and shall contain the following information to the fullest extent possible:

(1) Identification of the applicant;

(2) A precise description of the article;

(3) Description of the domestic industry affected, including pertinent information regarding companies and their plants, locations, capacity and current output of the industry;

(4) Pertinent statistics on imports and domestic production showing the quantities and values of the article;

(5) Nature, sources, and degree of the competition created by imports of the article;

(6) The effect that imports of the article may have upon the restoration of domestic production capacity in the event of national emergency;

(7) Employment and special skills involved in the domestic production of the article;

(8) Extent to which the national economy, employment, investment, specialized skills, and productive capacity is or will be adversely affected;

(9) Revenues of Federal, State, or local Governments which are or may be adversely affected;

(10) National security supporting uses of the article including data on applicable contracts or sub-contracts, both past and current; and

(11) Any other information or advice relevant and material to the subject matter of the investigation.

(d) Statistical material presented should be, if possible, on a calendar-year basis for sufficient periods of time to indicate trends. Monthly or quarterly data for the latest complete years should be included as well as any other breakdowns which may be pertinent to show seasonal or short-term factors.

§ 705.6 Confidential information.

(a) This paragraph (a) specifies the requirements for submission of classified national security information, business confidential information, and the treatment of United States Government communications during an investigation under Section 232 of the Trade Expansion Act of 1962, as amended (a “Section 232 investigation”), or as part of a request or application for an investigation.

(1) Classified national security information. Any information or material, which the applicant or any other party desires to submit in confidence at any stage of the investigation or as part of an application for an investigation, that is classified national security information (“classified information”) within the meaning of Executive Order 13526 shall be marked and submitted to the Bureau of Industry and Security (BIS) in accordance with the guidelines set forth in 32 CFR part 2001 regarding the handling of classified information. Before sending classified information, the applicant or any other party wishing to submit classified information must contact BIS for any additional handling instructions or submission requirements that may be applicable by contacting the Director, Office of Technology Evaluation, Room H-1093, U.S. Department of Commerce, Washington, DC 20230. Any information or material submitted that is identified as classified information must be accompanied at the time of submission by a statement indicating the degree of classification, the authority for the classification, and the identity of the classifying entity. Classified national security information described in this paragraph (a)(1) does not require a public version.

(2) Business confidential information. Any information or material submitted electronically, which the applicant or any other party desires to submit in confidence at any stage of the investigation or as part of an application for an investigation, that is business confidential information (trade secrets, commercial or financial information, or any other information considered sensitive or privileged) should be contained within a file beginning its name with the characters “BC”. Any page containing business confidential information must be clearly marked “BUSINESS CONFIDENTIAL” on the top of that page, and any pages not containing confidential information should not be so marked. By submitting information or material identified as business confidential information, the applicant or other party represents that the information is exempted from public disclosure, either by the Freedom of Information Act (5 U.S.C. 552 et seq.) or by some other specific statutory exemption. Any request for business confidential treatment must be accompanied at the time of filing by a statement justifying non-disclosure and referring to the specific legal authority claimed. The public summary version required under § 705.5 must be clearly marked “PUBLIC”. When submitted electronically, the file name of the non-confidential version should begin with the character “P”. The “P” should be followed by the name of the person or entity submitting the information or material. All filers should name their files using the name of the person or entity submitting the comments.

(3) United States Government communications. Communications from agencies of the United States Government, including but not limited to requests for investigation submitted pursuant to § 705.5, will generally not be made available to the public.

(b) The Department may refuse to accept as business confidential any information or material it considers not intended to be protected under the legal authority claimed by the applicant, or under other applicable legal authority. Any such information or material so refused shall be promptly returned to the submitter and will not be considered. However, such information or material may be resubmitted as non-confidential in which case it will be made part of the public record.

§ 705.7 Conduct of an investigation.

(a) If the Department determines that it is appropriate to afford interested parties an opportunity to present information and advice relevant and material to an investigation, a public notice shall be published in the Federal Register soliciting from any interested party written comments, opinions, data, information or advice relative to the investigation. This material shall be submitted as directed within a reasonable time period to be specified in the notice. All material shall be submitted with 6 copies. In addition, public hearings may be held pursuant to § 705.8 of this part.

(b) All requests and applications filed and all material submitted by interested parties, except information on material that is classified or determined to be confidential as provided in § 705.6 of this part, will be available for public inspection and copying in the Bureau of Industry and SecurityFreedom of Information Records Inspection Facility, Room H-4525, U.S. Department of Commerce, Washington, DC 20230, in accordance with regulations published in part 4 of title 15, Code of Federal Regulations.

(c) Further information may be requested by the Department from other sources through the use of questionnaires, correspondence, or other appropriate means.

(d) The Department shall, as part of an investigation, seek information and advice from, and consult with, appropriate officers of the United States or their designees, as shall be determined. The Department shall also consult with the Secretary of Defense regarding the methodological and policy questions raised in the investigation. Upon the request of the Secretary, the Secretary of Defense shall provide the Secretary with an assessment of the defense requirements of the article in question. Communications received from agencies of the U.S. government or foreign governments will not be made available for public inspection.

(e) Any request or application that is filed while an investigation is in progress, concerning imports of the same or related article and raising similar issues, may be consolidated with the request, application or motion that initiated the investigation.

§ 705.8 Public hearings.

(a) If it is deemed appropriate by the Department, public hearings may be held to elicit further information.

(1) A notice of hearing shall be published in the Federal Register describing the date, time, place, the subject matter of each hearing and any other information relevant to the conduct of the hearing. The name of a person to contact for additional information or to request time to speak at the hearing shall also be included. Public hearings may be held in more than one location.

(2) Hearings shall be open to the public unless national security classified information will be presented. In that event the presiding officer at the hearing shall close the hearing, as necessary, to all persons not having appropriate security clearances or not otherwise authorized to have access to such information. If it is known in sufficient time prior to the hearing that national security classified information will be presented the notice of hearing published in the Federal Register shall state that national security classified information will be presented and that the hearing will be open only to those persons having appropriate security clearances or otherwise specifically authorized to have access to such information.

(b) Hearings shall be conducted as follows:

(1) The Department shall appoint the presiding officer;

(2) The presiding officer shall determine all procedural matters during the hearing;

(3) Interested parties may appear, either in person or by representation, and produce oral or written information relevant and material to the subject matter of the investigation;

(4) Hearings will be fact-finding proceedings without formal pleadings or adverse parties. Formal rules of evidence will not apply;

(5) After a witness has testified, the presiding officer may question the witness. Questions submitted to the presiding officer in writing by any interested party may, at the discretion of the presiding officer, be posed to the witness. No cross examination of any witness by a party shall be allowed.

(6) Each hearing will be stenographically reported. Transcripts of the hearing, excluding any national security classified information, may be purchased from the Department at actual cost of duplication, and will be available for public inspection in the Bureau of Industry and Security Freedom of Information Records Inspection Facility, Room H-4525, U.S. Department of Commerce, Washington, DC 20230.

§ 705.9 Emergency action.

In emergency situations, or when in the judgment of the Department, national security interests require it, the Department may vary or dispense with any or all of the procedures set forth in § 705.7 of this part.

§ 705.10 Report of an investigation and recommendation.

(a) When an investigation conducted pursuant to this part is completed, a report of the investigation shall be promptly prepared.

(b) The Secretary shall report to the President the findings of the investigation and a recommendation for action or inaction within 270 days after beginning an investigation under this part.

(c) An Executive Summary of the Secretary's report to the President of an investigation, excluding any classified or proprietary information, shall be published in the Federal Register. Copies of the full report, excluding any classified or proprietary information, will be available for public inspection and copying in the Bureau of Industry and Security Freedom of Information Records Inspection Facility, Room H-4525, U.S. Department of Commerce, 14th Street, N.W., Washington, D.C. 20230; tel. (202) 482-5653.

§ 705.11 Determination by the President and adjustment of imports.

(a) Upon the submission of a report to the President by the Secretary under § 705.10(b) of this part, in which the Department has found that an article is being imported into the United States in such quantities or under such circumstances as to threaten to impair the national security, the President is required by Section 232(c) of the Trade Expansion Act of 1962, as amended (19 U.S.C. 1862(c)) to take the following action

(1) Within 90 days after receiving the report from the Secretary, the President shall determine:

(i) Whether the President concurs with the Department's finding; and

(ii) If the President concurs, the nature and duration of the action that must be taken to adjust the imports of the article and its derivatives so that the such imports will not threaten to impair the national security.

(2) If the President determines to take action under this section, such action must be taken no later than fifteen (15) days after making the determination.

(3) By no later than thirty (30) days after making the determinations under paragraph (a)(1) of this section, the President shall submit to the Congress a written statement of the reasons why the President has decided to take action, or refused to take action.

(b) If the action taken by the President under this section is the negotiation of an agreement to limit or restrict the importation into the United States of the article in question, and either no such agreement is entered into within 180 days after making the determination to take action, or an executed agreement is not being carried out or is ineffective in eliminating the threat to the national security, the President shall either:

(1) Take such other action as deemed necessary to adjust the imports of the article so that such imports will not threaten to impair the national security. Notice of any such additional action taken shall be published in the Federal Register; or

(2) Not take any additional action. This determination and the reasons on which it is based, shall be published in the Federal Register.

§ 705.12 Disposition of an investigation and report to the Congress.

(a) Upon the disposition of each request, application, or motion made under this part, a report of such disposition shall be submitted by the Secretary to the Congress and published in the Federal Register.

(b) As required by Section 232(e) of the Trade Expansion Act of 1962, as amended (19 U.S.C. 1862(c)), the President shall submit to the Congress an annual report on the operation of this part.

Supplement No. 1 to Part 705—Requirements for Applications Requesting a Waiver to the Import Prohibition for Polysilicon and Polysilicon Derivatives

On August 6, 2026, the President issued Proclamation 11052, “Adjusting Imports of Polysilicon and Its Derivatives Into the United States,” finding that imports of polysilicon and polysilicon derivatives (Polysilicon Products) threatened to impair the national security of the United States. In Proclamation 11052, pursuant to section 232 of the Trade Expansion Act of 1962, as amended (19 U.S.C. 1862), the President authorized the Secretary of Commerce (Secretary) to take action, in coordination with U.S. Customs and Border Protection (CBP), to restrict imports of Polysilicon Products from companies that are stockpiling those products in advance of December 4, 2026. Consistent with Proclamation 11052, the Department of Commerce (Commerce) establishes restrictions on all existing importers of record (IORs) importing Polysilicon Products prior to December 4, 2026, as well as provides criteria for existing IORs, and new IORs registered with CBP on or after August 6, 2026, to be eligible to import Polysilicon Products prior to December 4, 2026. Commerce is actively monitoring imports of Polysilicon Products to identify IORs who are stockpiling in advance of December 4, 2026. Commerce will inform CBP of IORs that are importing Polysilicon Products in volumes substantially greater than their historic averages and new IORs that registered with CBP on or after August 6, 2026 that are importing Polysilicon Products prior to December 4, 2026, in weekly volumes greater than the quantities specified in paragraph (h). These IORs will be prohibited from making further entries of Polysilicon Products into the United States prior to December 4, 2026, except as described in paragraph (g) of this supplement. However, IORs subject to this restriction may apply to Commerce to lift this restriction, according to the conditions laid out in this supplement.

(a) Scope. This supplement specifies the requirements and process for how directly affected parties located in the Unites States may submit applications for a waiver from the importation prohibition of Polysilicon Products implemented by the President. This supplement also identifies the time periods for such submissions, the methods of submission, and the information that must be included in such submissions. This supplement also identifies the process for analysis of the applications and the action taken upon the final determinations by the Secretary or designee.

(b) Applications for an import prohibition waiver. Who may submit an application?

(1) Importers of Polysilicon Products into the United States.

(2) [Reserved]

(c) Timeframe for submitting an application. The Bureau of Industry and Security (BIS) will open a submissions window to receive applications for import prohibition waivers between September 22, 2026, and December 3, 2026.

(d) Application requirements. For the request to be considered a valid application, the applicant must adhere to the following general requirements and complete the application found on www.bis.gov/232, providing the following information:

(1) Submission through the import prohibition waiver inbox at Polysilicon232@bis.doc.gov;

(2) Requests must be submitted in PDF format;

(3) Limited to 30 pages inclusive of all attachments;

(4) Any business confidential submissions must also include a non-confidential public version;

(5) Clear identification of the applicant (e.g., the individual or company);

(6) A precise description of the Polysilicon Products;

(7) The weekly average volume of Polysilicon Products imported in 2025;

(8) The weekly average volume of Polysilicon Products imported between January 1, 2026 and August 6, 2026;

(9) The weekly average volume of Polysilicon Products imported into the United States since August 6, 2026;

(10) The aggregate volume of Polysilicon Products imported into the United States since August 6, 2026;

(11) The eight-digit or ten-digit Harmonized Tariff Schedule of the Unites States (HTSUS) classification for the determination;

(12) Information about the products it manufactures and where such manufacturing takes place;

(13) An explanation of how the company intends to use the imported Polysilicon Products to include whether the imported Polysilicon Products support existing manufacturing operations in the United States or support investment projects for manufacturing in the Unites States. Applicants should provide annual production volume and capacity rates for each facility receiving the imported Polysilicon Products and any applicable allocation for each facility;

(14) The use of affiliates that do not customarily import Polysilicon Products, or the use of new IORs to import Polysilicon Products;

(15) An estimate of the type of Polysilicon Products, and, for each type of Polysilicon Product, an estimate of the anticipated volume of imports into the United States prior to December 4, 2026, if a waiver is granted;

(16) An explanation of the business considerations associated with the applicant's Polysilicon Product import volumes;

(i) For IORs registered with CBP prior to August 6, 2026, and identified by Commerce as subject to a prohibition from importing Polysilicon Products into the United States prior to December 4, 2026, applicants should explain why the volume of imports prior to receiving an import prohibition were for legitimate commercial considerations unrelated to the implementation of Proclamation 11052;

(ii) For IORs that register with CBP on or after August 6, 2026, applicants should detail why they have established themselves as a new IOR, whether they have pre-existing customers or business relationships in the Unites States for Polysilicon Products that predate August 6, 2026, the foreign manufacturers whose Polysilicon Products they seek to import into the United States, and any other factor the company deems relevant to this portion of their application;

(17) Applications should be signed by a senior official in the company certifying the accuracy of the assertions and facts contained in its application;

(18) A commitment to not stockpile Polysilicon Products prior to December 4, 2026;

(19) Any other information the applicant believes is necessary to facilitate Commerce's decision-making. Additionally, if a company believes that any of the requirements listed under paragraph (d) of this supplement are not appropriate for their particular situation, they should provide a detailed explanation of why the requirements are inappropriate or inapplicable.

(e) Review of applications. Commerce will review the received applications between September 22, 2026, and December 3, 2026, to validate the received applications contain all the required elements and do not exceed the page limitation. In the instance where the applicant did not include all the required elements or improperly filed the submission, at the discretion of the Under Secretary for Industry and Security, the applicant may be granted a 48-hour widow to resubmit a proper application. Commerce may request supplemental information in additional to the information listed in paragraph (d) of this supplement. If Commerce does request such information, Commerce will provide a timeframe during which the supplemental information must be provided. Commerce may respond to individual applications with questions, revisions, conditional approval pending applicant's acceptance of proposed modifications to the proposal.

(f) Import prohibition waiver decisions. Commerce will make an individual, fact-specific, company-specific decision for each applicant. Commerce intends to respond to applications within fourteen (14) days of the date of receipt. Approved applicants will be notified in writing of Commerce's decision.

(g) Obligations of customs brokers. Customs brokers that enter Polysilicon Products must not file or procure or assist in the filing of any claim, or of any document, affidavit, or other papers, known by such customs broker to be false. Additionally, customs brokers must not give, or solicit or procure the giving of, any information or testimony that the broker knew or should have known was false or misleading in any matter pending before the Department of Homeland Security (DHS) or to any DHS representative. Actions by customs brokers to evade the requirements in paragraph (g) of this supplement may result in CBP enforcement actions. In determining whether a new IOR may be attempting to use a broker's services to violate supplement no. 1 to part 705, a customs broker should consider the following factors:

(1) Whether an IOR is a new IOR that was established on or after August 6, 2026;

(2) For new IORs, whether the new IOR has made other entries of Polysilicon Products during the current week, and, if so, the precise volume of Polysilicon Products that the new IOR has entered;

(3) For new IORs, the direct and indirect beneficial owners of the new IOR, whether such owners have created other new IORs to import Polysilicon Products, and whether those other new IORs have met or exceeded the quantities specified in table 1 to this supplement; and

(4) For new IORs, the ultimate consignee and delivery user, and whether the goods will be transferred to or used for the benefit of an IOR subject to a prohibition under this supplement.

(h) Exception to the import prohibition. New IORs that register with CPB on or after August 6, 2026, are prohibited from importing Polysilicon Products except, as specified in table 1 to this supplement, the Polysilicon Products identified by Harmonized Tariff Schedule of the United States (HTSUS) code in weekly volumes no greater than the quantities listed.

Supplement No. 2 to Part 705—Requirements for Submissions Requesting Inclusions to the Adjustment of Imports of Automobiles and Automobile Parts Pursuant to Section 232 of the Trade Expansion Act of 1962, as Amended

On March 26, 2025, the President issued Proclamation 10908, “Adjusting Imports of Automobiles and Automobile Parts into The United States” (Automobile Proclamation), which imposed additional tariffs on certain automobiles and automobile parts. The Automobile Proclamation also required the Secretary of Commerce to establish a process for including additional automobile parts articles for passenger vehicles and light trucks within the scope of the tariffs imposed by the Automobile Proclamation. In addition to inclusions made by the Secretary of Commerce (the Secretary), the process is to provide for including additional automobile parts articles at the request of a domestic producer of an automobile or automobile parts article, or an industry association representing one or more such producers, where the request establishes that imports of additional automobile parts articles have increased in a manner that threatens to impair the national security or otherwise undermines the objectives set forth in Proclamation 9888, the Automobile Proclamation, or any subsequent proclamation addressing the threatened impairment to the national security under Section 232 of the Trade Expansion Act of 1962, as amended (Section 232). When the Secretary receives such a request from a domestic producer or industry association, the Secretary, after consultation with the United States International Trade Commission and U.S. Customs and Border Protection, is to issue a determination regarding whether to include the articles within 60 days of receiving the request. Any additional automobile parts articles that the Secretary has determined to be included within the scope of the Automobile Proclamation tariffs are to be so included in the Federal Register describing the determination. The Federal Register notice will note the effective date of duties. The notice in the Federal Register is to be made as soon as practicable but no later than 14 days after the Secretary's determination.

(a) Scope. This supplement specifies the requirements and process for how directly affected parties located in the United States may submit requests for inclusions to the duties imposed by the President. This supplement also specifies the requirements and process for how parties in the United States may submit inclusion requests (both business confidential and public versions) and public comments in response to submitted inclusion requests for inclusion of automobile parts articles in the tariffs imposed by the President under the Automobile Proclamation (collectively, 232 submissions). This supplement also identifies the time periods for such submissions, the methods of submission, and the information that must be included in such submissions. This supplement also identifies the process for analysis of the submissions and public comments and the action taken upon the final determinations by the Secretary or designee.

(b) Inclusion requests. Who may submit an inclusion request?

(1) Producers of automobiles or automobile parts within the United States; or

(2) An industry association representing one or more such producers may submit inclusion requests.

(c) Timeframe of submitting requests. The International Trade Administration (ITA) will open a submissions window to receive automobile parts articles inclusion requests from industry during two-week submission windows four times annually, beginning on the first business day of each January, April, July, and October; the first such window is to open starting on October 1, 2025. All two-week submissions will occur on the first of the prescribed months.

(d) Inclusion request requirements. For the request to be considered a valid request, the requestor must adhere to the following general requirements and provide the following:

(1) Submission through the automobile inclusions process inbox at AutoInclusions@trade.gov within the 14-day public comment window;

(2) Requests must be submitted in PDF format;

(3) Limited to 30 pages inclusive of all attachments;

(4) Any business confidential submissions must also include a non-confidential public version;

(5) Clear identification of the applicant (i.e., individual, company, or trade association);

(6) A precise description of the automobile parts article;

(7) The eight or ten-digit Harmonized Tariff Schedule of the United States (HTSUS) classification that serves as the basis for the determination;

(8) An explanation of why the article is an automobile parts article;

(9) Pertinent information on the domestic industry affected;

(10) Statistics on imports and domestic production; and

(11) A description of how and to what extent imports of the article threaten to impair the national security or otherwise undermines the objectives set forth in Proclamation 9888, the Automobile Proclamation, or any subsequent proclamation addressing the threatened impairment to the national security under Section 232.

(e) Review of inclusion petition requests. ITA will review the received requests on a rolling basis during the two-week submission window to validate that the received requests contain all the required elements and do not exceed the page limitation. In the instance where the requestor did not include all the required elements or improperly filed the submission, at the discretion of the Under Secretary for International Trade, the requestor will be granted a 48-hour window to resubmit a proper filing.

(f) Where and how to submit public comments—(1) Where to submit? Public comments are to be made via regulations.gov via the regulations.gov ID. The following regulations.gov IDs correspond to the four annual windows: January regulations.gov ID: ITA-2025-0039, April regulations.gov ID: ITA-2025-0040, July regulations.gov ID: ITA-2025-0037; and October regulations.gov ID: ITA-2025-0038. You may submit business confidential and public version public comments, identified by the regulations.gov ID above through the Federal eRulemaking website: https://www.regulations.gov. No other submission methods are being used for submitting public comments for the inclusions process. Follow the instructions for submitting public comments. All filers using the regulations.gov should use the name of the person or entity submitting the comments as the name of their files, in accordance with the instructions below. Anyone submitting business confidential information should clearly identify the business confidential portion at the time of submission, file a statement justifying nondisclosure and referring to the specific legal authority claimed, and provide a non-confidential version of the submission.

(2) Business confidential submissions. For comments submitted electronically containing business confidential information, the file name of the business confidential version should begin with the characters “BC.” Any page containing business confidential information must be clearly marked “BUSINESS CONFIDENTIAL” on the top of that page. The corresponding non-confidential version of the comments must be clearly marked “PUBLIC.” The file name of the non-confidential version should begin with the character “P.” The “BC” and “P” should be followed by the name of the person or entity submitting the comments. Any submissions with file names that do not begin with a “BC” or “P” will be assumed to be public and will be made publicly available through https://www.regulations.gov. Commenters submitting business confidential information are encouraged to scan a hard copy of the non-confidential version to create an image of the file, rather than submitting a digital copy with redactions applied, to avoid inadvertent redaction errors which could enable the public to read business confidential information.

(g) Review and Public Comment Phase. ITA will publicly post non-confidential versions of all valid requests for a 14-day public comment window on https://regulations.gov after the conclusion of the two-week submission window. Members of the public will have the opportunity to comment on the inclusion requests submitted by parties. Collecting public comments ensures a transparent, complete, and legally robust process for conducting analysis and making final determinations of derivative inclusion requests. ITA will review all accepted inclusion requests and public comments.

(h) Decision Phase. The Secretary or designee will sign a positive or negative determination. After the determination, ITA will, for each inclusions request, and, within 60 days of receiving the request, generate and publicly post on regulations.gov a determination memorandum that:

(1) States whether the request was approved or denied; and

(2) Summarizes the rationale for making this determination.

(3) The date of signature on the determination memorandum must be prior to the close of the respective 60-day derivative inclusion processing period, as directed in the Automobile Proclamation. A Federal Register notice will then be issued that modifies Annex I to the Automobile Proclamation with the included products at the eight- to ten-digit HTSUS subheadings. Duties on newly included articles will take effect on the date specified in that Federal Register notice.>